CrystalFrame guide

Find all specifications, installations instructions and network diagram

CrystalFrame specifications

Weight : 8 Kg
Dimensions : 1231mm x 702mm x 62mm
Cluster assembly : Yes (see multi-screen connections)
Vertical assembly : Yes (see multi-screen connections)
Native Resolution : HD – 1920 x 1080 px
Aspect Ratio 16 : 9
Viewing Angle 178°/178°
Color-space 24bit
Connectivity : Ethernet, WiFi
Operating System : Crystal-OS
Cloud content : Yes
Supply Voltage : 90-240vAC
Min. Current : 3A

Multi-screen bezel correction

Bezel Correction of each side is ~20 pixels.
Side by side total of the bezel is ~40 pixels.

Multi-screen connection

Required components

One multi-screen link kit is included in each CrystalFrame integrator kits.
Additional link kits are available on the online shop

X-Link joint

CRF-QXX-004

T-Link joint

CRF-QXX-005

Metric Screw

ISO 7046-1- M3 x 12 - 4.8

Control box layout

Single layout

Multi-screen layout

Layout information

1. These layouts are examples, other configuration control box layout are possible.
2. The maximum length of the flat cable is 48″
3. Control boxes should be positioned out of the user’s sight but should remain accessible for maintenance

Flat cable connection

To make the appropriate connection, the flat cables must be connected on the same side and in the same order A to A, B to B, all boards facing up. Example: Connector A is connected on the right side of the PCB, it must be connect to the A side on the control box, which is the left side.
Note: The screen will appear black if the flat cable are connected in reverse order. It will not damage the CrystalFrame, unplug the flat cables and make the correct connection.

Flat cable installation

Flat cables Information

1. The flat cables can be folded carefully to go around the aluminum strip and joined to a corner of the screen
2. Place the cable in the proper direction, with the copper contacts against those of the ports
3. The self-adhesive finishing hood can cover the wiring for a neat finish

Flat cable connector

 1. Place the flat cable metal connection toward the connector

 2. Carefully place each side notch in the connector’s bracket

3. Carefully close the top hatch of the connector. If the connector is misaligned, it can cause damage, see below.

Flat cable alignment

* Be careful in making the connection, if the connector is misaligned, it can shortcut the display processor, causing permanent damage.

The connector is perpendicular to the display PCB, both notches are in place.

The connector is not perpendicular to the display PCB, only one notch in place. This will short-circuit the board. Beware.

Nano-flat cables

* Be careful with the nano-flat cables. They are the most fragile part of the CrystalFrame. The display PCB has been fixed to the aluminum strip to reduce its exposure to possible physical disturbance. 

Inappropriate manipulation or installation of the plastic finishing could permanently damage the screen.

Do not touch them in any case.

Plastic finishing placement

 1. Align the plastic finishing to the CrystalFrame aluminum strip

2. Carefully place the plastic cover without touching the nano-flat connections.

LED strip installation

-Place the LED strip around the frame on the indicated surface.
-The strip must start at one corner and end a the same corner.

Additional Information

Remove visible corner light spills by breaking associated resistors. Each resistor covers 3 consecutive LED.

The LED strip should run on the outside of the visible glass area

The LED strip should run toward the control box. Cut the LED strip in alignment with a copper joint

Control box specifications

Front view

Back view

120/240 Voltage switch

Metric dimensions

CrystalFrame kiosk installation

1. Design a maintenance access for the control box.
2. Place the kiosk away from direct and indirect sunlight. The human eye adjust to the surrounding environment, thus locating a shaded place for the CrystalFrame is ideal.
3. Multiple attachments can be connected into the control box: motion sensors, motorized equipment, speakers, cameras, microphones, printers and many more.

Integrator kit content

CrystalFrame 55″

CRF-S55-MK-II

1x Control box

CRF-E55-001

1x Self-adhesive LED

CRF-O55-001

1x Plastic finishing

CRF-PLC-001

2x Flat cable

CRF-C47-001

1x AC Supply Cable

Model varies depending on market

1x Crystal-OS

CRF-STF-001

1x Link kit

CRF-LINK-KIT

1x Touch screen (Interactive Kit)

LS-TSCRE55

Integrator full catalog

CrystalFrame 65″

CRF-S65-STD

CrystalFrame 55″

CRF-S55-MK-II

CrystalFrame 55″ (2015-2017)

CRF-S55-STD

Touch Screen

LS-TSCRE55

Light Box Panel

contact us for details

Magnetic Shelves

Contact us for details

Crystal-OS Player

CPL-P11-001

Control Box

CRF-E55-001

Self-Adhesive LED

CRF-O55-001

Flat Cables

CRF-C47-001

AC Supply Cable

Model varies depending on market

Plastic Finishing

CRF-PLC-001

X-Link Joint

CRF-QXX-004

T-Link Joint

CRF-QXX-005

Metric Screw

ISO 7046-1 - M3 x 12 - 4.8

Link kit

CRF-LINK-KIT

Crystal-OS

CRF-STF-001

Network diagram

* Network cabling is optional, all control boxes include WiFi capabilities.